drop ceiling soundproofing
drop ceiling soundproofingdrop ceiling soundproofing

Drop Ceiling Noise Blokker

$153.28 – $479.00

The Drop Ceiling Noise Blokker is designed to allow optimal ceiling soundproofing above existing ACT tile grids. Placed directly on top of the existing tile, and designed with a woven 1 lb/sf Mass Loaded Vinyl core with STC 26, you can greatly reduce airborne noise passing through your ceiling grid.

This issue is most common in office spaces where a wall between offices ends at the ceiling grid, and does not go all the way to the deck. This allows sound to “flank” up and over the wall through the open space in the ceiling, and travel to the adjacent office – another term we use for this is “cross-talk”.

SKU: B-005 Category: Tag:

Description

Is it nearly impossible to find a quiet space within your office environment or do you consistently hear everything that’s going on in the office next door? Chances are, sound is being transmitted through the ceiling, up into the cavity above and right back down into your workspace. With Commercial Acoustics Drop Ceiling Noise Blokker your office noise solution is here!

If you’re experiencing a lack of speech privacy throughout multiple closed and open office spaces, consider a Vektor Sound Masking System from our sister company – Commercial Acoustics.

 

Additional information

Weight1 lbs

Reviews

There are no reviews yet.

Be the first to review “Drop Ceiling Noise Blokker”

Your email address will not be published. Required fields are marked *

Related products

  • crumbled rubber sound underlayment crumbled rubber sound mat
    AcoustiStep Underlayment
    $68.00 – $299.00
    Select options
    crumbled rubber sound underlayment crumbled rubber sound mat
    AcoustiStep Underlayment
    $68.00 – $299.00

    With a Delta-IIC of 26, AcoustiStep is best used in homes or commercial projects with wood or laminate flooring. Designed to achieve an IIC of 50+ on a number of substrates, the sound mat installs easily over plywood or concrete subfloors.

    Depending on your IIC requirements, the rubber underlayment is available in multiple thicknesses – 2mm, 3mm, 5mm, and 10mm.

    Select options
  • pipe lagging
    Pipe Blokker
    $600.00
    Add to cart
    pipe lagging
    Pipe Blokker
    $600.00

    Pipe Blokker is acoustical lagging for soundproofing pipes that combines a layer of 1 lb/sf, 1/8″ thick Mass Loaded Vinyl, with a layer of soft, 3pcf fiberglass. This product is meant to wrapped around pipes in order to mitigate the noise that they can cause. It can also be used around loud HVAC vents, Trash Chutes and Trash Compactors.

    The fiberglass layer helps to keep the rigid pipe from touching any other rigid materials, and the mass loaded vinyl layer blocks the noise created by noise within the pipes such as flowing or flushing water.

    Pipe Blokker is available in 4’x25′ rolls, and can be easily cut down using a razor blade or utility knife.

    Add to cart
  • Three rolls of silver seam seal tape
    Seam Seal Tape for MLV
    $23.52
    Add to cart
    Three rolls of silver seam seal tape
    Seam Seal Tape for MLV
    $23.52

    MLV Seam Seal Tape is a heavy-duty polyethylene tape coated with a high tack acrylic adhesive. It is designed for use with our Mass Loaded Vinyl products, to properly seal any seams between sheets. Seam Seal tape does not need to be used on seams that meet on a stud, it is only necessary for vertical seams that do not butt up to each other on the stud, horizontal seams, and to mend any over-cuts. Seam seal tape can also be used to seal seams between sheets of sound underlayments.

    Each roll of MLV Seam Seal Tape is 2″x150′.

    Add to cart