View: 12 24 ALL
  • MLV Sound Barrier
    $199.00$1,500.00
    Select options
    MLV Sound Barrier
    $199.00$1,500.00

    Mass Loaded Vinyl, or MLV, is a Vinyl-based sound membrane designed to add maximum soundproofing and dampening to your wall assembly. With STC 26, our 1 lb/sf MLV can improve wall soundproofing performances by 40% or more. Much more efficient than simply stacking layers of drywall, Mass Loaded Vinyl can be used to provide broad-frequency sound attenuation performance. Installing a single layer on to wood- or metal-frame assemblies increase their STC by 10+ points, effectively doubling their soundproofing performance.

  • Outlet Blokker
    $9.00

    Commercial Acoustics Outlet Blokker is specifically designed to maintain high acoustical ratings in fire rated walls. It is easy to apply and will stay resilient (will not harden). Model Outlet Blokker is UL classified for both metallic and non-metallic outlet boxes to prevent the spread of smoke, fire and toxic gases. The pads are sized to cover standard size outlet boxes and are designed to work with several sound rated wall assemblies.

  • Paintable Acoustic Panels
    $402.50

    Paintable acoustic panels come in the color White only, but the surface of the panel is paintable. Be sure to use only  a light or matte coat of paint, as too heavy of a coat can inhibit the sound absorbing quality of the acoustic panel. Ideal for use in spaces such as recording studios, restaurants, office lobbies, conference rooms and anywhere else decorative acoustic materials would be desired.

  • Pipe Blokker
    $600.00

    Pipe Blokker is acoustical lagging for soundproofing pipes that combines a layer of 1 lb/sf, 1/8″ thick Mass Loaded Vinyl, with a layer of soft, 3pcf fiberglass. This product is meant to wrapped around pipes in order to mitigate the noise that they can cause. It can also be used around loud HVAC vents, Trash Chutes and Trash Compactors.

    The fiberglass layer helps to keep the rigid pipe from touching any other rigid materials, and the mass loaded vinyl layer blocks the noise created by noise within the pipes such as flowing or flushing water.

    Pipe Blokker is available in 4’x25′ rolls, and can be easily cut down using a razor blade or utility knife.

  • Portable Sound Masking White Noise Machine
    $60.00

    Sound Masking White Noise Machines are ideal for personal use in bedrooms, or in office spaces that may not have a commercial sound masking system installed. White noise machines work to cover, or “mask” distracting noises that would otherwise keep you awake at night, or distract you during the work day.

    Our portable sound masking machines can be switched between 10 different types of white noise, and have adjustable volume capabilities. Includes an AUX port so it can be used as a speaker for your music, and a headphone jack if you sleep or work next to someone who doesn’t enjoy white noise.

  • Out of Stock
    soundproofing insulation soundproofing insulation
    QuietFil Wall Batting
    $19.47$32.64

    QuietFil™ R-13 is a premium high-performance soundproofing insulation with thermal qualities to conserve energy and reduce utility costs. Acoustically, QuietFil™often outperforms typical fiberglass, cellulose and foam insulations. QuietFil™ Soundproofing Insulation products are designed for interior and exterior walls, ceilings and attic applications.

    Our user-friendl home and commercial installation materials allow for easy installation with minimal tools required. QuietFil™ installs with a tight friction fit between wood and metal studs to minimize sound and thermal energy transmission and can be used separately or in conjunction with a variety of our other soundproofing products. QuietFil™ can be cut with a utility knife or simply tear off unneeded pieces.

  • Seam Seal Tape for MLV
    $23.52

    MLV Seam Seal Tape is a heavy-duty polyethylene tape coated with a high tack acrylic adhesive. It is designed for use with our Mass Loaded Vinyl products, to properly seal any seams between sheets. Seam Seal tape does not need to be used on seams that meet on a stud, it is only necessary for vertical seams that do not butt up to each other on the stud, horizontal seams, and to mend any over-cuts. Seam seal tape can also be used to seal seams between sheets of sound underlayments.

    Each roll of MLV Seam Seal Tape is 2″x150′.

  • Standard AcousticCurtain
    $149.00$209.00

    The AcousticCurtain™ is a soundproof curtain that blocks outside noise, solving your noise problems at minimal expense and without disrupting the comforts of your home. Unlike other sound-absorbing curtains, it is designed to block sound coming in and out of your space, rather than simply reducing echo. Each AcousticCurtain™ is  hand-crafted and customized to fit the dimensions of your window.

  • Wall Blokker
    $199.00

    Wall Blokker is a 1lb/sf EVA-based Mass Loaded Vinyl designed to improve wall assembly performance by 6-12 STC points. At just 1/8″ thick, one layer of Wall Blokker is a fraction of the cost and just as effective as 3-4 layers of drywall.

    Tested in dozens of metal- and wood-stud wall configurations, it installs easily with staples or screws into the studs. Our Mass Loaded Barrier can be easily cut around penetrations such as outlet box and light switches.

  • Wall Blokker Lite
    $160.00

    Wall Blokker Lite is a 0.6 lb/sf EVA-based Mass Loaded Vinyl designed to improve metal-stud wall assembly performance by 6-11 STC points. At just 1/16″ thick, Wall Blokker Lite is a cost-effective alternative to multiple layers of drywall.

    Tested on Metal Studs (20-Gauge & 25-Gauge), our thinner Mass Loaded Barrier is easily hung on metal studs using 1/2″ staples or pan-head screws. Cut around any penetrations using a razor blade or a utility knife.

  • Wall Blokker Pro
    $285.00

    Wall Blokker PRO combines a 1 lb/sf EVA-based Mass Loaded Vinyl Layer with a polyester scrim layer for sound reduction across a wide range of frequencies. Wall Blokker PRO is the heaviest duty mass loaded vinyl on the market due to its fused polyester scrim layer, and is ideal for use on wood stud wall assemblies or when sandwiched between an existing layer of drywall and and additional drywall layer.

    Designed for maximum soundproofing and decoupling, it is 3/16″ thick including the polyester scrim layer, as opposed to the standard 1/8″ thick MLV.