-
AcoustiStep Underlayment$68.00 – $299.00With a Delta-IIC of 26, AcoustiStep is best used in homes or commercial projects with wood or laminate flooring. Designed to achieve an IIC of 50+ on a number of substrates, the sound mat installs easily over plywood or concrete subfloors.
Depending on your IIC requirements, the rubber underlayment is available in multiple thicknesses – 2mm, 3mm, 5mm, and 10mm.
-
Out of Stock
Out of Stock Drop Ceiling Noise Blokker$153.28 – $479.00The Drop Ceiling Noise Blokker is designed to allow optimal ceiling soundproofing above existing ACT tile grids. Placed directly on top of the existing tile, and designed with a woven 1 lb/sf Mass Loaded Vinyl core with STC 26, you can greatly reduce airborne noise passing through your ceiling grid.
This issue is most common in office spaces where a wall between offices ends at the ceiling grid, and does not go all the way to the deck. This allows sound to “flank” up and over the wall through the open space in the ceiling, and travel to the adjacent office – another term we use for this is “cross-talk”.
-
Fence Blokker$1,202.85 – $1,381.05Fence Blokker is a heavy-duty reinforced Mass Loaded Vinyl designed for long-term use outside. Ideal for hanging on fences or around exterior equipment to improve sound attenuation at the source.
If you would like the roll cut and grommeted before being sent out, please select that option here and let us know in the order notes section how tall you’d like the panels to be (4.5’x6′, 4.5’x8′, 4.5’x10′, etc).
NOTE: If “Cut & Grommeted” selected – grommets will be placed along the top 4.5′ wide edge unless otherwise specified in Order Notes at checkout. Current lead time is 6-8 weeks.
-
Floor Blokker$240.00Our Floor Blokker is a highly engineered sound-damping underlayment that is designed to be installed underneath any style flooring or within walls or ceilings to create quieter living or working spaces throughout an entire location. The Floor Blokker isolation mat provides the fastest and most cost-effective way to meet the Building Code requirement of STC/IIC 50.
Made of recycled polymer-composite matrix, the Floor Sound Mat installs under hardwood, tile, or laminate to improve the sound-blocking capacity of the floor. May be nailed down, glued down, or floated for maximum IIC improvement. For a sound mat that is suitable to use under Porcelain or Ceramic Tile, check out our AcoustiStep Crumbled Rubber Underlayment.
-
MLV Sound Barrier$199.00 – $1,500.00Mass Loaded Vinyl, or MLV, is a Vinyl-based sound membrane designed to add maximum soundproofing and dampening to your wall assembly. With STC 26, our 1 lb/sf MLV can improve wall soundproofing performances by 40% or more. Much more efficient than simply stacking layers of drywall, Mass Loaded Vinyl can be used to provide broad-frequency sound attenuation performance. Installing a single layer on to wood- or metal-frame assemblies increase their STC by 10+ points, effectively doubling their soundproofing performance.
-
Outlet Blokker$9.00Commercial Acoustics Outlet Blokker is specifically designed to maintain high acoustical ratings in fire rated walls. It is easy to apply and will stay resilient (will not harden). Model Outlet Blokker is UL classified for both metallic and non-metallic outlet boxes to prevent the spread of smoke, fire and toxic gases. The pads are sized to cover standard size outlet boxes and are designed to work with several sound rated wall assemblies.
-
Pipe Blokker$600.00Pipe Blokker is acoustical lagging for soundproofing pipes that combines a layer of 1 lb/sf, 1/8″ thick Mass Loaded Vinyl, with a layer of soft, 3pcf fiberglass. This product is meant to wrapped around pipes in order to mitigate the noise that they can cause. It can also be used around loud HVAC vents, Trash Chutes and Trash Compactors.
The fiberglass layer helps to keep the rigid pipe from touching any other rigid materials, and the mass loaded vinyl layer blocks the noise created by noise within the pipes such as flowing or flushing water.
Pipe Blokker is available in 4’x25′ rolls, and can be easily cut down using a razor blade or utility knife.
-
Seam Seal Tape for MLV$23.52MLV Seam Seal Tape is a heavy-duty polyethylene tape coated with a high tack acrylic adhesive. It is designed for use with our Mass Loaded Vinyl products, to properly seal any seams between sheets. Seam Seal tape does not need to be used on seams that meet on a stud, it is only necessary for vertical seams that do not butt up to each other on the stud, horizontal seams, and to mend any over-cuts. Seam seal tape can also be used to seal seams between sheets of sound underlayments.
Each roll of MLV Seam Seal Tape is 2″x150′.
-
Standard AcousticCurtain$149.00 – $209.00The AcousticCurtain™ is a soundproof curtain that blocks outside noise, solving your noise problems at minimal expense and without disrupting the comforts of your home. Unlike other sound-absorbing curtains, it is designed to block sound coming in and out of your space, rather than simply reducing echo. Each AcousticCurtain™ is hand-crafted and customized to fit the dimensions of your window.
-
Wall Blokker$199.00Wall Blokker is a 1lb/sf EVA-based Mass Loaded Vinyl designed to improve wall assembly performance by 6-12 STC points. At just 1/8″ thick, one layer of Wall Blokker is a fraction of the cost and just as effective as 3-4 layers of drywall.
Tested in dozens of metal- and wood-stud wall configurations, it installs easily with staples or screws into the studs. Our Mass Loaded Barrier can be easily cut around penetrations such as outlet box and light switches.
-
Wall Blokker Lite$160.00Wall Blokker Lite is a 0.6 lb/sf EVA-based Mass Loaded Vinyl designed to improve metal-stud wall assembly performance by 6-11 STC points. At just 1/16″ thick, Wall Blokker Lite is a cost-effective alternative to multiple layers of drywall.
Tested on Metal Studs (20-Gauge & 25-Gauge), our thinner Mass Loaded Barrier is easily hung on metal studs using 1/2″ staples or pan-head screws. Cut around any penetrations using a razor blade or a utility knife.
-
Wall Blokker Pro$285.00Wall Blokker PRO combines a 1 lb/sf EVA-based Mass Loaded Vinyl Layer with a polyester scrim layer for sound reduction across a wide range of frequencies. Wall Blokker PRO is the heaviest duty mass loaded vinyl on the market due to its fused polyester scrim layer, and is ideal for use on wood stud wall assemblies or when sandwiched between an existing layer of drywall and and additional drywall layer.
Designed for maximum soundproofing and decoupling, it is 3/16″ thick including the polyester scrim layer, as opposed to the standard 1/8″ thick MLV.
