pipe lagging
pipe laggingpipe lagging

Pipe Blokker

$600.00

Pipe Blokker is acoustical lagging for soundproofing pipes that combines a layer of 1 lb/sf, 1/8″ thick Mass Loaded Vinyl, with a layer of soft, 3pcf fiberglass. This product is meant to wrapped around pipes in order to mitigate the noise that they can cause. It can also be used around loud HVAC vents, Trash Chutes and Trash Compactors.

The fiberglass layer helps to keep the rigid pipe from touching any other rigid materials, and the mass loaded vinyl layer blocks the noise created by noise within the pipes such as flowing or flushing water.

Pipe Blokker is available in 4’x25′ rolls, and can be easily cut down using a razor blade or utility knife.

SKU: B-011 Category: Tags: ,

Description

How to Soundproof a Pipe

Pipe Blokker is acoustical Pipe/Duct Lagging, used for soundproofing pipes, which combines a loaded vinyl with a reinforced aluminum foil facing on one side and a layer of 3 pcf fiberglass on the other side. The vinyl property provides mass and flexibility while the aluminum adds increased strength, weatherability, improved fire retardancy and a more attractive appearance.

When installing Pipe Blokker, be sure to seal seams between pieces using Seam Seal tape or any other acrylic-based adhesive tape. The fiberglass layer should be touching the pipe, and the mass loaded vinyl layer should be facing outward.

Additional information

Size

54" x 30'

Reviews

There are no reviews yet.

Be the first to review “Pipe Blokker”

Your email address will not be published. Required fields are marked *

Related products

  • mass loaded vinyl mass loaded vinyl
    MLV Sound Barrier
    $199.00 – $1,500.00
    Select options
    mass loaded vinyl mass loaded vinyl
    MLV Sound Barrier
    $199.00 – $1,500.00

    Mass Loaded Vinyl, or MLV, is a Vinyl-based sound membrane designed to add maximum soundproofing and dampening to your wall assembly. With STC 26, our 1 lb/sf MLV can improve wall soundproofing performances by 40% or more. Much more efficient than simply stacking layers of drywall, Mass Loaded Vinyl can be used to provide broad-frequency sound attenuation performance. Installing a single layer on to wood- or metal-frame assemblies increase their STC by 10+ points, effectively doubling their soundproofing performance.

    Select options
  • metal stud wall soundproofing
    Wall Blokker Lite
    $160.00
    Select options
    metal stud wall soundproofing
    Wall Blokker Lite
    $160.00

    Wall Blokker Lite is a 0.6 lb/sf EVA-based Mass Loaded Vinyl designed to improve metal-stud wall assembly performance by 6-11 STC points. At just 1/16″ thick, Wall Blokker Lite is a cost-effective alternative to multiple layers of drywall.

    Tested on Metal Studs (20-Gauge & 25-Gauge), our thinner Mass Loaded Barrier is easily hung on metal studs using 1/2″ staples or pan-head screws. Cut around any penetrations using a razor blade or a utility knife.

    Select options
  • heavy mass loaded vinyl
    Wall Blokker Pro
    $285.00
    Select options
    heavy mass loaded vinyl
    Wall Blokker Pro
    $285.00

    Wall Blokker PRO combines a 1 lb/sf EVA-based Mass Loaded Vinyl Layer with a polyester scrim layer for sound reduction across a wide range of frequencies. Wall Blokker PRO is the heaviest duty mass loaded vinyl on the market due to its fused polyester scrim layer, and is ideal for use on wood stud wall assemblies or when sandwiched between an existing layer of drywall and and additional drywall layer.

    Designed for maximum soundproofing and decoupling, it is 3/16″ thick including the polyester scrim layer, as opposed to the standard 1/8″ thick MLV.

    Select options